FAQs / Knowledge Base

Category » Memory-Map on GPS units

There were 4 articles found in this category:

1. Holux FT130 Firmware Update
   This document illustrates the procedure for updating the Holux FunTrek 130 GPS with a firmware update. Do I need this Update? probably not as we and our distributors caught the problem and fixed it fairly quickly. But if you have aquired a Holux from another source and you're finding that Memor ...
2. Loading maps to the Hema Navigator (HN5 and HN5i)
   This article describes how to load maps from the PC (maps supplied on DVD) to the Hema Navigator. Important! If connecting the unit to the PC via a USB cable, make sure that it is in "Mass Storage" mode and not using Active Sync. To avoid difficulty, we recommend the use of a card reader attache ...
3. How to self assemble an SD card for use in a Holux GPS
   How to self assemble an SD card for use in a Holux fun trek 130 If you purchased the Holux from us, the Memory-Map app will already be installed. Otherwise, Download the GPS software app from the downloads page. Open the downloaded zip folder, extract and copy the App folder to the SD card or ...
4. Can maps be loaded to a Garmin GPS?
   Memory-Map branded maps do not work on a Garmin GPS (or Magellan, lowrance, etc.) These GPS units use proprietary formats and only accept mapping products specially made for the purpose. The Memory-Map software does connect to a Garmin for the transfer of tracks and waypoints but you cannot s ...